Please check before use

1. Whether the filter housing of the water purification device is damaged or scratched.

2. After connecting, carefully check that all joints of the whole machine should be free of leakage. If leakage is found, tighten it.

Install and use

1. First unscrew the filter housing of the water purification device, put the filter element into the filter housing and tighten it with a special wrench.

2. Close the user's water inlet pipe valve, disassemble the determined water pipe connection part, connect the water purifier in series with pipe fittings, and fix the water purifier on the wall with self-tapping screws.

3. Open the water inlet valve and water purification outlet valve, rinse the filter element of the water purification device for 5 to 1 minutes, and use it after the water is clear.

maintenance

Regularly replace or clean the filter element to keep the water pure. In order to ensure that the filter elements give full play to their respective performance and ensure clean water quality and normal water flux, the water purification depends on the quality of the water source and the amount of impurities contained. Depending on the user's experience:

1. When the user feels that the water output is significantly reduced, or the taste becomes worse, please consider replacing or cleaning the filter element;

2. The replacement time of the filter element changes completely according to the user's water quality and the amount of purified water used. However, if a safe replacement frequency is adopted, the water quality of the purified water produced by the normal operation of the water purifier can be guaranteed.

Therefore, the above suggested replacement cycle of various filter elements is for reference only.

Filter cleaning

Unscrew the filter housing, remove the filter element, remove the dirt on the surface of the filter element, rinse with clean water, reinstall it in the filter element housing, and restore the original state after installation

Water production: 120L/hour

The filter element configuration can be installed according to the customer's local water machine!

Maintenance considerations

1. It is recommended to open the water inlet ball valve when draining water, and close the water inlet ball valve when not draining water;

2. When it is not used for a long time, the water inlet ball valve should be closed to cut off the water source;

3. It should be operated as the first use when it is used again after long-term use;

4. After replacing the filter element, clean the "0" type sealing ring before screwing the filter housing into the end cap again, and tighten the filter housing until there is no water seepage.

5. Disinfection should be performed when necessary